新闻动态

首页 > 新闻动态
电缆槽模具生产的三大优势
发布人:管理员   发布时间:2018-9-8

         电缆槽模具的制作工艺简单,制作周期短,市场上对于钢模具的反应比较好,钢模具的优势主要展现在了实际的生产过程中。电缆槽模具的质量是衡量整个模具行业质量的标准,把握好模具生产过程中的事项对于今后模具的使用有着直接的关系。这里我们说说模具生产过程中热处理问题的注意事项。Cable groove mold has the advantages of simple manufacturing process, short manufacturing cycle and good response to steel mold in the market. The advantages of steel mold are mainly displayed in the actual production process. The quality of cable groove mold is the standard to measure the quality of the whole mold industry. It is directly related to the use of the mold in the future to grasp the matters in the mold production process. Here we talk about the matters needing attention in the heat treatment of mould production.

         首先热处理工艺技术的熟练程度对模具本身起着关键性的作用。电缆槽模具因材质原因要求具有精度高,韧性高,寿命长。而模具的精准度在制作过程中也起着关键性的作用,钢模具制作中如果组织转变不均匀彻底就会由于应力的不足造成尺寸不规范,装配过程中就会不合适,直接影响使用过程中寿命的折损。First, the proficiency of heat treatment technology plays a key role in the mold itself. The cable groove mold has high accuracy, high toughness and long life due to material requirements. And the precision of the mold also plays a key role in the manufacturing process. If the microstructure changes unevenly and thoroughly, the dimension of the steel mold will be irregular due to the lack of stress, and the assembly process will be inappropriate, which directly affects the life loss in the use process.
                 

上一篇:没有了