新闻动态

首页 > 新闻动态
电缆槽模具在制造过程中如何控制质量
发布人:管理员   发布时间:2018-10-14

         电缆槽模具在大批量生产中,应选用长寿命的模具材料,对于易变形、易断裂失效的通用模具,需要选用高强度、高韧性的材料;压铸模要采用热疲劳抗力高、高温强度高的合金钢;塑料模具则应选择易切削、组织致密、抛光性能好的材料。In mass production of cable groove dies, long life die materials should be selected, and high strength and toughness materials should be selected for general dies which are easy to be deformed and fractured; alloy steel with high thermal fatigue resistance and high temperature strength should be used for die casting dies; and easy cutting, compact structure and good polishing performance should be chosen for plastic dies. Material Science.

        模具使用寿命可提高5~6倍。电缆槽模具的选材也就成为了市场的优势,对于这种模具来说,模具的性能才是最关键的,模具性能:磨损抗力,变形抗力,断裂抗力,热稳定性,高温磨损,抗氧化,对于水泥制品来说这种电缆槽模具表面光滑程度比较高,适合于高速高铁的要求,The service life of dies can be increased by 5~6 times. Material selection of cable groove dies has become a market advantage. For this kind of dies, the performance of the dies is the most critical. Die performance: wear resistance, deformation resistance, fracture resistance, thermal stability, high temperature wear, oxidation resistance. For cement products, the surface of the cable groove dies is relatively smooth, suitable for high-speed high-speed iron. Requirement,

        每日的生产量大,可以保障工期的顺利进行等优势。有效控制电缆槽模具的质量需要制定一套完整的、实用有效控制模具的生产管理系统,实现有效控制模具的生产管理流程的产品数据管理、工艺数据管理、计划管理、进度管理的计算机信息化管理系统,The daily production is large enough to guarantee the smooth progress of the construction period. To effectively control the quality of cable groove dies, it is necessary to establish a complete, practical and effective production management system for controlling dies, and to realize the computer information management system of product data management, process data management, planning management and schedule management for effectively controlling the production management process of dies.

       包括有效控制模具的生产计划制定、模具设计、工艺制定、车间任务分派和产品检验,库房管理等,使模具制造及相关辅助信息从计划制定到完工交付能够实现全方位跟踪管理。Including effective control of mold production planning, mold design, process planning, workshop assignment and product inspection, warehouse management, so that the mold manufacturing and related ancillary information from the planning to completion of delivery can achieve a full range of tracking management.

                              

上一篇:没有了