新闻动态

首页 > 新闻动态
电缆槽模具常用规格及制定
发布人:管理员   发布时间:2018/11/24

电缆槽模具的质量是衡量模具行业的质量标准,同时也间接的反应了城市的精神面貌,把握好模具生产过程中的事项对于今后模具的使用有直接关系。

The quality of cable groove mould is the quality standard to measure the mould industry. It also indirectly reflects the spirit of the city. It is directly related to the future use of the mould to grasp the matters in the production process of the mould.

保定永久模具厂不断努力追求质量的完美。电缆槽模具结构一般由底架、外模、内模和卡具组成。外模由两个侧面活动模板和两个端头模板组成。

Baoding Permanent Die & Mould Factory constantly strives for the perfection of quality. Cable groove die structure is generally composed of chassis, external die, internal die and clamp. The exterior die consists of two side moving templates and two end templates.

                                   

电缆槽模具的材质大体上是ABS树脂颗粒和PP聚丙烯塑料这两种,ABS树颗粒在化工业的中文名又叫塑料合金,电缆槽模具的品种多样、种类繁多,规格尺寸多样,

The material of cable groove die is ABS resin particle and P P polypropylene plastic. The Chinese name of ABS tree particle is plastic alloy in chemical industry. There are many kinds and sizes of cable groove die.

经常用的电缆槽模具尺寸有:72*50*37.5 、128*50*52、50*50*36、50*35*36、72*50*37.5、72*33*37.5等,电缆槽模具有组模、拆模方便,模具组装后稳定,不漏浆,生产的电缆槽尺寸稳定、表面光洁等特点,并且电缆槽模具还具备韧性强,不易变形,精密度高,破损率低等特点,使用后可回收等。

Commonly used cable groove die sizes are 72*50*37.5, 128*50*52, 50*50*36, 50*35*36, 72*50*37.5, 72*33*37.5 and so on. Cable groove die has the characteristics of easy assembly, stable assembly, no leakage, stable size of cable groove and smooth surface. Moreover, cable groove die also has strong toughness and is not easy to be manufactured. Deformation, high precision, low damage rate and other characteristics, can be recovered after use.

上一篇:没有了