新闻动态

首页 > 新闻动态
电缆槽模具工艺
发布人:管理员   发布时间:2018-12-30

电缆槽模具的原材料决定了它的生产工艺,对于都是模具,但是在使用过程中还是会出现一些细小的问题,这种模具一般都是比较复杂的模具,塑料模具也可以但是需要数量控制价格,

The raw material of cable groove mould decides its production process. It is all mould, but there are still some minor problems in the process of using. This kind of mould is generally more complex mould. Plastic mould can also be used, but it needs quantity to control price.

同时钢模具的原材料都是钢板,电缆槽模具决定钢板的厚度的电缆模具的尺寸规格,尺寸大小来考虑模具的承受能力,来判断钢模具的厚度,这就成为了钢模具选择原材料的重点。

At the same time, the raw material of steel die is steel plate. The size specification of cable die which determines the thickness of steel plate is taken into account to determine the bearing capacity of the die and the thickness of the steel die. This has become the focus of the selection of raw materials for steel die.

                  

电缆槽模具生产工艺比较简单,直接将混凝土放入塑料模具中,经过震动成型,它的技术含量就在于脱模的时候,水泥制品的完整度,对于模具钢,特别是含碳量高的冷作模具钢,因塑性很差,一般不用抗拉强度而是以抗弯强度作为实用指标。

Cable groove die production process is relatively simple, directly put concrete into the plastic mould, after shaking, its technical content lies in the demoulding time, the integrity of cement products, for die steel, especially for cold work die steel with high carbon content, because of poor plasticity, generally do not use tensile strength but bending strength as a practical index.

抗弯试验甚至对极脆的材料也能反映出一定的塑性。电缆槽模具而 且,弯曲试验产生的应力状态与许多电缆槽模具工作表面产生的应力状态极相似,能比较精确地反映出材料的成分及组织因素对性能的影响。

Bending tests can also reflect certain plasticity even for extremely brittle materials. Moreover, the stress state produced by bending test is very similar to that produced by the working surface of many cable groove dies, which can accurately reflect the influence of material composition and structure factors on properties

上一篇:没有了