电缆槽模具是一个发展迅速的行业，电缆槽模具也逐渐取代着一些重工业的产品，因为金属元素是固定产量有时候不能重复利用
Hexagonal slope protection die is a rapidly developing industry. Hexagonal slope protection die is gradually replacing some products of heavy industry, because metal elements are fixed output and sometimes can not be reused.
而随着现在科技的快速发展，对于电缆槽模具的使用也是越来越多，从而带动了电缆槽模具在****度与强度的进步。
With the rapid development of science and technology, more and more hexagonal slope protection moulds are used, which leads to the improvement of accuracy and strength of hexagonal slope protection moulds.
电缆槽模具在不断的进行着完善，不管是****度还是选材都使的其更加的适合这个市场。
Hexagonal slope protection die is constantly improving, both accuracy and material selection make it more suitable for this market.
电缆槽模具的硬度在冲击载小的时分的，电缆槽模具的硬度和抗磨是成正比例开展，所以这个时分的硬度上面应该做到最适宜水平，不能过大过小，所以在消费电缆槽产品的硬度上面一定要把握一个度
The hardness of the hexagonal slope protection die is proportional to the hardness and wear resistance of the hexagonal slope protection die when the impact load is small, so the hardness of the hexagonal slope protection die at this time should be the most appropriate level, not too large or too small, so we must grasp a degree of hardness on the consumption of hexagonal slope protection die products.
只要这样才能更好延长电缆槽模具产品的寿命，从而增加使电缆槽模具工程愈加科学，愈加规范。
Only in this way can the life of hexagonal slope protection die products be prolonged better, so as to increase the hexagonal slope protection die engineering more scientific and more standardized.
