新闻动态

首页 > 新闻动态
电缆槽模具的制作和使用方法
发布人:管理员   发布时间:2020-8-22

电缆槽模具从使用材质上来说,一般电缆槽模具使用的都是ABS生产,大型塑料模具需要保证自身不会发生变形,这种原料的模具很多,但是并不是用这种原料生产的模具都能销量好,这只是其中的一个因素。
Generally speaking, the cable trough mold is produced by ABS. Large plastic mold needs to ensure that it will not deform. There are many molds of this material, but not all the molds made with this material can sell well. This is just one of the factors.

利用这种模具生产水泥电缆槽可以批量生产,可以达到和制砖机一样的产量,可以制作不同规格的电缆槽模具,****满足了客户的不同要求,而水泥电缆槽的品质也得到了广大客户的一致认可,对于生产环境的要求很低。
Using this mold to produce cement cable trough can be mass production, can achieve the same output as brick making machine, can make different specifications of cable tray mold, fully meet the different requirements of customers, and the quality of cement cable trough has been unanimously recognized by customers, and the requirements for production environment are very low.

        

电缆槽模具的具体使用方法很简单,直接将混凝土方式塑料模具中,通过震动平台来震动成型,放置24小时后可以脱模,但是这是正常情况下。
The concrete use method of the cable trough mold is very simple. In the concrete plastic mold, it is vibrated through the vibration platform. After 24 hours of storage, the mold can be demoulded, but this is normal.

一般天气比较寒冷的时候脱模时间会比较长,虽然操作比较简单,但是还需要一定的技巧,塑料模具选用的是工程聚丙烯pp,容易受到温度的影响,所以一般情况下生产时注意脱模的问题,可以增加模具内侧的光滑程度,来帮助塑料模具的使用
Generally, the demoulding time will be longer when the weather is relatively cold. Although the operation is relatively simple, it still needs certain skills. The plastic mold is made of Engineering polypropylene PP, which is easily affected by temperature. Therefore, in general, attention should be paid to the demoulding problem during production, which can increase the smoothness of the inner side of the mold to help the use of the plastic mold

上一篇:没有了