电缆槽模具主要用于高速公路和高铁,方便电缆电线收集。模具拆卸方便、出模快,我们在安装的过程要注意哪些问题呢！
Cable trough mold is mainly used for highway and high-speed railway, convenient for cable and wire collection. Mold disassembly is convenient, quick mold, we should pay attention to what problems in the process of installation!

1弱电流电缆在最上层依次为往下排列。电缆槽中应该有一定的空位，这就要选择电缆槽的时候注意尺寸。
1. The weak current cables are arranged downward in the top layer. There should be a certain space in the cable tray, which requires attention to the size when selecting the cable tray.

2水平敷设时，电缆槽之间的连接应尽量设置在跨距1/4处，电缆每隔2米左右须固定一下，垂直敷设时电缆隔1.5米固定一下。由于电缆槽使用复合材料制成。所以，使用中温度控制在200℃以内，以防止由于温度高而发生变形。
2. For horizontal laying, the connection between cable troughs should be set at 1 / 4 span as far as possible. The cable should be fixed every 2 meters or so. When laying vertically, the cable should be fixed at 1.5 meters. Since the cable tray is made of composite material. Therefore, the temperature in use should be controlled within 200 ℃ to prevent deformation due to high temperature.

3.日常使用中，避免出现老化现象，可以涂刷油漆、涂料等防老化材料，以便延长使用时间。大家在安装电缆槽模具的时候一定要注意安全。
3. In daily use, to avoid aging phenomenon, you can brush paint, paint and other anti-aging materials, in order to extend the use time. We must pay attention to safety when installing the cable tray mold.