电缆槽模具其本身是用于生产混凝土电缆槽的板金钢模具，其生产出的制成品适用范围是在铁路和公路的电缆槽。
The cable trough mold itself is a plate steel mold used to produce concrete cable trough, and its manufactured products are applicable to the cable trough of railway and highway.

电缆槽模具的制要作要经过好几个工艺流程。原料一般有塑胶注塑工艺与钣金件钢模具成形二种。
There are several technological processes to make cable trough mould. There are two kinds of raw materials: plastic injection molding and sheet metal forming.

并且在生产的全过程中不用设备抑制，只必须用混凝土、水泥砂浆等原材料与一套震动台来做相互配合即就行。
And in the whole process of production, there is no need to restrain the equipment, only concrete, cement mortar and other raw materials and a set of shaking table to do mutual cooperation that is OK.

预制件塑胶模具选用聚丙烯塑料颗粒历经塑料机高温解决引入事先提前准备好的预制件模芯之中,待历经制冷解决以后成形预制件模具。
Polypropylene plastic particles are selected as the preform plastic mold, which is introduced into the preform core prepared in advance after the high temperature solution of the plastic machine, and the preform mold is formed after the refrigeration solution.

预制件钢模具以3-8mm的不锈钢板历经打卷,裁切,造型设计,结构加固,电焊焊接,组装,打磨抛光等多道办理手续制做而成。
The prefabricated steel mold is made of 3-8mm stainless steel plate through rolling, cutting, modeling design, structural reinforcement, welding, assembly, polishing and other procedures.