新闻动态

首页 > 新闻动态
电缆槽模具的优势体现在多个方面
发布人:管理员   发布时间:2020-12-25

电缆槽模具是高切削加工模具是运用数控车的高速放置和高走刀速率,以切削方法进行模具的好制造工艺流程,高速切削加工模具的优势具体表现在下列好多个方面:
The cable trough mold is a high-speed cutting mold, which is a good manufacturing process by using the high-speed placement and high cutting speed of CNC lathe. The advantages of high-speed cutting mold are shown in the following aspects:

①髙速切削粗加工和半精加工,进一步提高金属材料切除率。
① High speed rough machining and semi finish machining further improve the metal material removal rate.


②选用髙速切削数控车床、数控刀片和加工工艺,可加工淬硬原材料。针对中小型模具,在原材料调质处理后,粗、精加工能够在一次夹装中进行;针对大中型模具,在调质处理前粗加工和半精加工,调质处理淬硬后精加工。
② High speed cutting CNC lathe, NC blade and processing technology are selected to process hardened raw materials. For small and medium-sized molds, after quenching and tempering of raw materials, rough and finish machining can be carried out in one clamping process; for large and medium-sized molds, rough machining and semi finishing before quenching and tempering, and finishing after quenching and tempering are carried out.

      


③髙速高精密硬切削替代光整加工,降低很多用时的手工制作刃磨,比火花放电加工提高工作效率50%。
③ High speed and high precision hard cutting can replace finishing, reduce a lot of manual grinding time, and improve the work efficiency by 50% compared with spark discharge machining.

④硬切削加工最终成形表面,提升表面品质、样子精密度(不但表面表面粗糙度低,并且表面光泽度高),用以繁杂斜面的模具加工具有优点。
④ Hard cutting can improve the surface quality and appearance precision (not only the surface roughness is low, but also the surface glossiness is high). It has the advantages of using the die to process the complicated inclined plane.

⑤防止了火花放电和切削造成的渗碳、烫伤和微裂痕状况,大大减少了电缆槽模具精加工后的表面损害,提升模具使用寿命20%。
⑤ It can prevent carburizing, scalding and micro cracks caused by spark discharge and cutting, greatly reduce the surface damage of cable trough die after finishing, and improve the service life of the die by 20%.

⑥钢件发烫少、切削力减少,热膨胀小,融合CAD/CAM技术性用以迅速加工电级,非常是样子繁杂、厚壁类易形变的电级。
⑥ Steel parts are less hot, cutting force is reduced, and thermal expansion is small. The integration of CAD / CAM technology is used to rapidly process electrical grade, which is very complex and thick wall type and easy to deform.

 

上一篇:没有了
下一篇:电缆槽模具