The cable tray mold can be used to make railway cable tray, which is simple and convenient to operate. When in use, the production can be completed according to a certain operation process, and the produced products can be qualified and can be used normally.
在使用前需要检查模具的表面是否完整,只有这样才能制作出合格的表面光滑的产品,在使用的过程中不容易出现脱落损坏的情况,这样就可以不用频繁的更换,给施工方省去了不少的麻烦。
Before use, it is necessary to check whether the surface of the mold is complete. Only in this way can we make qualified products with smooth surface. It is not easy to fall off and damage in the process of use. In this way, it can not be replaced frequently, which saves a lot of trouble for the construction party.
检查完成后需要将粘连的尘土清除干净,尘土会导致生产的产品的坚实度不足,很容易变形,这样就不容易对电缆进行检查。
After the inspection, the adhesive dust needs to be removed. The dust will lead to insufficient firmness of the produced products and easy deformation, so it is not easy to inspect the cable.
清理后就需要进行将其安装,安装时需要使用螺丝进行连接,需要连接紧密,这样才能在灌料时不出现漏浆的情况,制作的产品可以正常使用,避免消耗原料而无法得到产品的情况,并且这样还可以省去很多的麻烦
After cleaning, it needs to be installed. During installation, screws need to be used for connection, and the connection needs to be tight, so that there is no slurry leakage during filling. The produced products can be used normally, so as to avoid the consumption of raw materials and the inability to obtain products, and this can also save a lot of trouble
安装后就需要进行灌料,灌料时需要将振动棒插入到原料中,方便原料中的气体排出,制作的产品中不会有很多的气泡,更少量的气泡就意味着产品的坚实度很强,可以承受很大的压力。
Filling is required after installation. During filling, the vibrating rod needs to be inserted into the raw material to facilitate the discharge of gas in the raw material. There will not be many bubbles in the produced product. A smaller amount of bubbles means that the product has strong firmness and can withstand great pressure.
