新闻动态

首页 > 新闻动态
简述电缆槽模具使用性能与过程
发布人:管理员   发布时间:2022-8-30
水泥电缆槽塑料模具是用来制作混凝土电缆槽的,是需要长时间重复使用的,并且为了厂商的利益是需要尽量增加使用的寿命,这样可以减少更换的频率,可以很大程度上增加利润。

The plastic mold for cement cable tray is used to make concrete cable tray, which needs to be reused for a long time. In addition, for the benefit of the manufacturer, the service life needs to be increased as much as possible, which can reduce the frequency of replacement and greatly increase the profit.

一般情况下,若是想要增加使用的寿命就需要加强对于混凝土电缆槽模具的维护,分为三部分,使用前、使用后以及保存时。

In general, if you want to increase the service life, you need to strengthen the maintenance of the concrete cable tray mold, which is divided into three parts: before use, after use and during storage.

在使用前,需要将其抹油,油层可以方便脱模操作,并且可以在自然风干的过程中起到保护的作用,因为使用的原料一般是使用的混凝土,混凝土是由水泥、沙子、石头和水按照一定比例混合而成的

Before use, the oil layer needs to be smeared with oil. The oil layer can facilitate the demoulding operation and can play a protective role in the process of natural air drying. Because the raw materials used are generally used concrete, which is mixed with cement, sand, stone and water in a certain proportion

                               

钢板在接触到水之后就很容易生锈,生锈的混凝土电缆槽模具虽然在二次的使用时不会产生很大的影响,但是会影响使用的寿命,不能达到减少成本的目的。

The steel plate is easy to rust after contacting with water. Although the rusted concrete cable tray mold will not have a great impact on the secondary use, it will affect the service life and cannot achieve the purpose of reducing costs.

油层可以很大程度上减少二者的接触,起到保护的作用。在使用之后需要将粘连的混凝土清理,因为在制作时需要直接的接触,所以就很容易出现粘连的情况,粘连的混凝土会对模具的二次使用以及保存。

The oil layer can greatly reduce the contact between the two and play a protective role. After use, the adhered concrete needs to be cleaned. Because direct contact is required during production, it is easy to be adhered. The adhered concrete will be reused and stored for the mold.

 

上一篇:没有了